If The Mast Mounting Option Is Chosen; Figure 2-7 | Mast Installation Bracket - Acom AOM 04AT User Manual

2.4.2. If the mast mounting option is chosen

Install the accessories set ACOM 04-MM for masts (see Section
) as described hereafter.
contents
Please, see

Figure 2-7 | Mast installation bracket

The weather protective cover (Pos. 1) is removed by unscrewing the five bolts (Pos. 2). The five cover holding
brackets (Pos. 3) are left in place, attached to the tuner body (Pos. 4).
Using the provided in the mounting kit four flat-head bolts (Pos. 5), the mast bracket (Pos. 6) is secured to
the tuner body (Pos. 4).
The weather protective cover (Pos. 1) is secured back in place with the five bolts (Pos. 2).
Thread the three hose clamps (Pos. 7), provided with the mounting kit, through their respective rectangle
opening pairs (Pos. 8) in the mast bracket (Pos. 6).
4
2
Page 32 of 88 | S e c t i o n INSTALLATION
User's Manual | ACOM 04AT | Remote Automatic Antenna Tuner and Switch
.
Figure 2-7 | Mast installation bracket
3
8
Figure 2-7 | Mast installation bracket
and
1.7 Equipment Supplied Table 2-1 | Package
1
6
5
7
October 2023