Table of Contents
Advertisement
7
Confirmation I/O variables
When G2 I/O modules are registered, I/O variables are automatically registered.
When right-click on G2 I/O module with mouse pointer, and "I/O variable" is selected, the I/O
Variable screen is displayed.
Please change on I/O variable screen when you change the variables.
However, because the I/O variables become network variables in FL654A, the I/O variables
should apply a name unique on "FL-net Control LAN". The I/O variable registered automatically
has unique name on "FL-net Control LAN".
In this sample, the I/O variables have not changed.
I/O module
Automatic registered I/O variable identifier
DI633
IO01001_01
DO633
IO01001_02
Important
・ The network variable of FL654A must be allocated as "one mass" in "module unit".
・ When the above-mentioned rule is not observed, the download of I/O configuration information
becomes an error (text parameter error).
Supplement
・ In I/O variable automatic registration, variables are declared as array type.
Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual
8.2 Remote I/O Startup Procedure
Data type
ARRAY[0..15] OF BOOL
ARRAY[0..15] OF BOOL
8
65
Advertisement
Table of Contents
