Startup Flow - Toshiba FL654A User Manual

8.2 Remote I/O Startup Procedure

8.2.3 Startup Flow

Describes how to set up the remote I/O module using nV-Tool to start up the system. Figure 8-1
shows a flow of building a new integrated controller.
System registration
(Off-line work using nV-Tool)
Prepare the remote I/O module.
(Operations using the FL654A)
Download
(Task performed with nV-Tool connected to the FL654A)
8
Start up the module
(Operation using FL654A)
Figure 8-6 Startup Procedure if the Remote I/O Module is set up Using nV-Tool
57
Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual