Checking The Link Fork; Checking The Rubber Grip - Husqvarna EE 5 2022 Owner's Manual

13.29

Checking the link fork

13.30

Checking the rubber grip

SERVICE WORK ON THE CHASSIS 13
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or defor-
mation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
F02203-01
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve
or the throttle tube.
401197-01
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
–
Check that screw
Guideline
Screw, fixed
grip
A
Diamond
M01695-10
1
is firmly seated.
M4 5 Nm (3.7 lbf ft)
must be located at the top.
®
Loctite 243™
61