Husqvarna EE 5 2022 Owner's Manual page 86

16 POWERPACK LV, BATTERY CHARGER
84
Info
Do not activate the vehicle while the battery charger is connected to the Powerpack LV.
If the vehicle is activated during the charging process, the vehicle switches to the malfunction state.
Info
If the temperature of the Powerpack LV exceeds the permissible value while it is being charged, the bat-
tery charger stops charging. The malfunction is displayed on the multifunctional element.
After the temperature of the Powerpack LV returns to the permissible range, charging is resumed auto-
matically.
M01731-10
M01686-10
M01732-10
Preparatory work
–
Position the battery charger. (
–
Press and hold the On/Off button until the multifunctional ele-
ment goes out.
–
Remove the magnetic switch
dlebar.
Main work
–
Remove charging socket protection cap
–
Remove charging plug protection cap
–
Make sure that all plugs, bushings, and cables are dry.
Warning
Risk of injury The intrinsic safety of the Powerpack
LV can only be guaranteed if the original battery
charger is used.
The Powerpack LV may only be charged with the
original battery charger.
–
Only use the original battery charger to charge the
Powerpack LV.
–
Connect the battery charger to the Powerpack LV.
Guideline
A
Observe plug marking
Insert the plug straight so that the contacts are not bent.
p. 82)
from the holder on the han-
1
.
2
.
.