13.20
Removing the seat
13.21
Mounting the seat
SERVICE WORK ON THE CHASSIS 13
Main work
–
Push splash protector
–
Mount the shock absorber with screw
Guideline
If necessary, observe the installation position noted during
removal.
Screw, top
shock absorber
M01724-10
–
Lift the link fork, mount screw
Guideline
Screw, bottom
shock absorber
–
Attach brake line
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
M01725-10
–
Hook the seat onto holding lug
and push it forward.
Holding lug
M01726-10
–
Close quick release
M01725-11
1
to the side.
2
.
M10
45 Nm (33.2 lbf ft)
3
and tighten it.
M10
45 Nm (33.2 lbf ft)
4
to the holder.
1
and raise the rear of the seat.
1
, lower the seat at the rear,
2
hangs on the front fairing.
3
.
®
Loctite
243™
®
Loctite
243™
p. 45)
55