Pumphead type
Value
0x01—
0x—00
0x—01
0x—02
0x—03
0x—04
0x—05
0x—06
0x—07
0x—09
0x—0A
0x—0B
Note: Numerical values cannot include a decimal point. To enter a speed, move the decimal point one
place to the right and enter an integer. To enter a tube size, move the decimal point two places to the
right and enter an integer. See examples below:
Data examples
Speed (rpm)
123.4
Set min/max speeds
The min/max speed parameters are used to set the minimum and maximum speed from the PROFIBUS
interface. The values are only used if the matching bit in the Control Word is enabled and they are not
zero. All values are 16 bit unsigned in 1/10th of RPM of the head speed.
24
Pumphead
Pre-assigned
520R
520R2
520 Sanitary Tri-clamp
elements (for 520REL,
520REM and 520REH
pumpheads)
520 Industrial quick release
elements (for 520REL,
520REM and 520REH
pumpheads)
505L (continuous tube)
313D
313D2
505L (double-Y element)
505CA
314D
314D2
Value
1234
m-530bpn-en-08.1