17.7
Adjusting the basic position of the shift lever
–
Remove screw
2
lever
.
401950-12
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position
and engage gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
401951-10
Mount and tighten screw
Guideline
Screw, shift
lever
TUNING THE ENGINE 17
1
with the washers and take off shift
A
of the shift lever and shift shaft.
1
with the washers.
M6
14 Nm (10.3 lbf ft)
®
Loctite
243™
129