Clutch Lever - Yamaha MT-07 Owner's Manual

used in case of an emergency or to
warn other drivers when your vehicle is
stopped where it might be a traffic haz-
ard.
The hazard lights can be turned on or
off only when the key is in the "ON" po-
sition. You can turn the main switch to
the "OFF" or "LOCK" position, and the
hazard lights will continue to flash. To
turn off the hazard lights, turn the main
switch to the "ON" position and oper-
ate the hazard switch again.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
"TRIP/INFO" switch
This switch is used to make setting and
display changes in the multi-function
meter unit. See page 4-5 for more in-
formation.
To use the "TRIP" switch, move the
"TRIP/INFO" switch in direction (a). To
use the "INFO" switch, move the
"TRIP/INFO" switch in direction (b).
1. "TRIP/INFO" switch
ECA10062
EAU78491
4-12
Instrument and control functions
(a) (a) (a)

Clutch lever

(b) (b) (b)
1
1. Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 6-3.)
EAU12823
1
4