Yamaha MT-07 Owner's Manual page 24

Instrument and control functions
 Avoid high engine speeds during
acceleration.
 Travel at a constant speed.
 Select the transmission gear that
is appropriate for the vehicle
speed.
4
Clock
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. With the display in the odometer,
push the "TRIP" switch until the
hour digits start flashing.
2. Use the "TRIP" switch to set the
hours.
3. Push the "INFO" switch and the
minute digits start flashing.
4. Use the "TRIP" switch to set the
minutes.
5. Push the "INFO" switch to confirm
the settings.
EAU92201
Transmission gear display
1. Transmission gear display
This display shows the selected gear.
The neutral position is indicated by "–"
and by the neutral indicator light.
Multi-function display
EAU87391
1. Multi-function display
The multi-function display is equipped
with the following:
 an odometer (ODO)
 two tripmeters (TRIP 1 and TRIP 2)
 a fuel reserve tripmeter (TRIP F)
1
 an instantaneous fuel consump-
 an average fuel consumption dis-
 a coolant temperature display (_ _
 an air temperature display (Air_ _
4-7
1
tion display (km/L, L/100 km, or
MPG)
play (AVE_ _._ km/L, AVE_ _._
L/100 km, or AVE_ _ _._ MPG)
°C)
°C)
EAU92211