Yamaha MT-07 Owner's Manual page 25

Push the "TRIP" switch to change the
display in the following order:
ODO → TRIP 1 → TRIP 2 → TRIP F →
km/L or L/100 km or MPG → AVE_ _._
km/L or AVE_ _._ L/100 km or AVE_ _._
MPG → _ _ °C → Air_ _ °C → ODO
TIP
 The fuel reserve tripmeter appears
only when you are low on fuel.
 Push the "INFO" switch to change
the display in the reverse order.
Odometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at 999999 and
cannot be reset.
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and while the digits are flashing, push
the "INFO" switch until it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter "TRIP F" and starts counting the
EAU86890
distance traveled from that point.
To reset the fuel reserve tripmeter,
change the display to the fuel reserve
tripmeter, and while the digits are
flashing, push the "INFO" switch until it
is reset.
TIP
If you do not reset the fuel reserve trip-
EAU92221
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
Instrument and control functions
Instantaneous
display
EAU92231
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, push the "TRIP"
switch until the measurement units
change.
 "km/L": the distance that can be
 "L/100 km": the amount of fuel
 "MPG": the distance that can be
4-8
fuel consumption
1
traveled on 1.0 L of fuel.
necessary to travel 100 km.
traveled on 1.0 Imp.gal of fuel.
EAU92241
4