Yamaha MT-07 Owner's Manual page 26

Instrument and control functions
TIP
When traveling under 10 km/h (6 mi/h),
"_ _._" is displayed.
TIP
4
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
Average fuel consumption display
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
fuel consumption measurement units,
push the "TRIP" switch until the mea-
EAU87790
surement units change.
 "AVE_ _._ km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": the average
amount of fuel necessary to travel
100 km.
 "AVE_ _._ MPG": the average dis-
tance that can be traveled on
EAU92251
1.0 Imp.gal of fuel.
TIP
 To reset the display, change the
display to the average fuel con-
sumption display, and while the
digits are flashing, push the "IN-
FO" switch until it is reset.
 After resetting, "_ _._" is shown
until the vehicle has traveled some
1 distance.
Coolant temperature display
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-36.)
TIP
 When the coolant temperature is
 The coolant temperature varies
4-9
1
below 40 °C, "Lo" will be dis-
played.
with changes in the weather and
engine load.
EAU90900