Handlebar Switches - Yamaha MT-07 Owner's Manual

Hide thumbs Also See for MT-07:
Table of Contents

Advertisement

Instrument and control functions

Handlebar switches

Left
1
2
4
3
4
5
1. Pass switch "
"
2. "TRIP/INFO" switch
3. Dimmer switch "
/
4. Turn signal switch "
/
5. Horn switch "
"
Right
EAU1234R
1. Stop/Run/Start switch "
2. Hazard switch "OFF/
Pass switch "
"
Press this switch to flash the headlight.
"
TIP
When the dimmer switch is set
to "
", the passing switch has no ef-
fect.
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
1
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
2
turned to the center position.
Horn switch "
/
/
"
"
Press this switch to sound the horn.
EAU12352
"
Stop/Run/Start switch "
To crank the engine with the starter,
set this switch to "
the switch down towards "
page 6-2 for starting instructions prior
to starting the engine.
Set this switch to "
gine in case of an emergency, such as
EAU12402
when the vehicle overturns or when the
/
"
throttle cable is stuck.
" for the high
" for the low beam.
Hazard switch "OFF/ "
Use this switch to turn on the hazard
lights (simultaneous flashing of all turn
signal lights). The hazard lights are
4-11
EAU12461
/
"
". To signal a left-hand
". When
EAU12501
"
EAU54213
/
/ "
", and then push
". See
" to stop the en-
EAU88272

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtn660mMtn690m

Table of Contents