DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual
DNS
On the Settings / Internet / DNS page, you can add DNS servers to the system.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
You can specify the addresses of DNS servers manually on this page or configure the router to
obtain DNS servers addresses automatically from your ISP upon installing a connection. Also here
you can specify addresses of reserve DNS servers which the router can use if the addresses
specified manually or obtained automatically are unavailable.
!
When you use the built-in DHCP server, the network parameters (including DNS servers)
are distributed to clients automatically.
Figure 81. The Settings / Internet / DNS page.
Page 97 of 213
Configuring via Web-based Interface