D-Link DIR-822 User Manual page 207

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of attempts
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
The additional settings window.
If you need to interrupt the check, click the CANCEL button (the button is available from the
moment the check starts).
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 207 of 213
Configuring via Web-based Interface
Description