Table of Contents
Advertisement
External Power Mode (LPC Only) Continued
Battery Charger Continued
Battery Type
Bulk charge current limit
Bulk phase terminates
Accept charge voltage @ 77°F/25°C
Accept voltage temp compensated
Maximum accept voltage at low temps
Accept phase terminates
Accept phase timeout
Float voltage @77°F/25°C
Float voltage temp comp
Condition voltage @ 77°F/25°C
Condition voltage temp compensation
Condition duration
Condition frequency
Charger Warm Battery: output switches to compensated float from
Charger High Battery Temp: output to off
Charger resumes in previous mode: bulk/accept/float
Bulk Charge Phase
1. When battery voltage reaches the accept voltage
Accept Charge Phase
1. When charge current is reduced.
2. When the accept timeout is reached.
Float Charge Phase
Condition (Equalization) Phase
Battery Temperature
bulk/accept/off (hot)
Table 3 Three-Step Charger Recipe with BTS Reference
12LPC15 Manual
AGM
SEE SPEC
14.3 VDC
5mv/cell/°C
15.0 VDC @ 4°C
14.5 VDC @ -6°C
6 hours (may be configured through CAN)
13.4 VDC
5mv/cell/°C
N/A
N/A
N/A
N/A
GEL
Wet
13.7 VDC
14.6 VDC
15.0 VDC @ 10°C
13.4 VDC
13.2 VDC
N/A
15.5 VDC
N/A
30.24mV/cell/°C
N/A
4 hours
N/A
Manual Control
>122F/50°C
<140F/60°C
>140F/60°C
<112F/45°C
Page 19
Advertisement
Table of Contents
Troubleshooting
