Order Data - GEM 543 eSyStep Operating Instructions Manual

6 Order data

The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Order codes
1 Type
Angle seat globe valve, electrically operated,
eSyStep
2 DN
DN 6
DN 8
DN 10
DN 15
DN 20
DN 25
3 Body configuration
2/2-way body
Angle valve body
4 Connection type
Spigot
Spigot DIN
Spigot EN 10357 series B,
formerly DIN 11850 series 1
Spigot EN 10357 series A (formerly DIN 11850
series 2)/DIN 11866 series A
Spigot DIN 11850 series 3
Spigot SMS 3008
Spigot ASME BPE
Spigot ISO 1127/EN 10357 series C/DIN 11866
series B
Spigot ANSI/ASME B36.19M schedule 10s
Spigot ANSI/ASME B36.19M schedule 40s
Threaded connection
Threaded socket DIN ISO 228
Threaded socket BS 21 Rc,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded socket NPT,
end-to-end dimension ETE DIN 3202-4 series M8
Threaded spigot DIN ISO 228
Flange
Flange EN 1092, PN 25, form B,
face-to-face dimension FTF EN 558 series 1, ISO
5752, basic series 1
Flange EN 1092, PN 25, form B
Flange ANSI Class 150 RF
Clamp
Clamp ASME BPE,
face-to-face dimension FTF ASME BPE
Clamp DIN 32676 series B,
face-to-face dimension FTF EN 558 series 1
www.gemu-group.com
Code 4 Connection type
543 Clamp DIN 32676 series A,
face-to-face dimension FTF EN 558 series 1
Clamp ASME BPE,
Code
face-to-face dimension FTF EN 558 series 1
6
5 Valve body material
8
1.4435, investment casting
10
1.4408, investment casting
15
1.4435 (F316L), forged body
20
1.4435, investment casting
25
6 Seat seal
Code
PTFE
D
PTFE, glass fibre reinforced
E
1.4404
Code
7 Voltage/frequency
24 V DC
0
16
8 Control module
Positioner
17
Positioner, configured for emergency power
module (NC)
18
Positioner, configured for emergency power
37
module (NO)
59
9 Regulating cone
60
without
Please find the number of the optional regulating
63
cone (R-No.) for the linear or equal-percentage
65
modified regulating cone in the Kv value table.
10 Actuator version
1
Actuator size 0
3C
11 Type of design
3D
without
Ra ≤ 0.6 μm (25 μinch) for media wetted surfaces,
9
in accordance with ASME BPE SF2 + SF3
mechanically polished internal
10
Ra ≤ 0.8 µm (30 µinch) for media wetted surfaces,
in accordance with DIN 11866 H3,
mechanically polished internal
13
Ra ≤ 0.4 μm (15 μinch) for media wetted surfaces,
in accordance with DIN 11866 H4, ASME BPE SF1
47
mechanically polished internal
Spindle seal PTFE-PTFE
80
12 CONEXO
82
without
Integrated RFID chip for electronic identification
and traceability
7 / 64
6 Order data
Code
86
88
Code
34
37
40
C2
Code
5
5G
10
Code
C1
Code
S0
S5
S6
Code
R....
Code
0A
Code
1903
1904
1909
2013
Code
C
GEMÜ 543
Positioner (Code S0)