About This Manual - Fagor CNC 8065elite T Manual

P r o b i n g ( · T · m o d e l ) .

ABOUT THIS MANUAL.

Title.
Models.
Type of documentation.
Electronic document.
Language.
Date of publication.
Manual reference
Associated version.
Responsibility exemption.
Trademarks.
Website / Email.
Probing (ꞏTꞏ model).
CNCelite
8058 8060
8065
End user manual. This manual describes how to operate the probe and
the probing canned cycles, ISO and conversational, for the T model.
Remarks.
Always use the manual reference associated with the software version
or a later manual reference. You can download the latest manual
reference from the download section on our website.
Limitations.
The availability of some of the features described in this manual are
dependent on the acquired software options. Moreover, the machine
manufacturer (OEM) customizes the CNC performance of each
machine using the machine parameters and the PLC. Because of this,
the manual may describe features that are not available for the CNC
or the machine. Consult the machine manufacturer for the available
features.
man_qc_58_60_65_t_prb.pdf. Manual available from the download
section of our website.
English [EN]. Refer to our website, download area, the languages
available for each manual.
June, 2021
Ref. 2106
v1.10
The information described in this manual may be subject to changes
due to technical modifications. Fagor Automation reserves the right to
change the contents of this manual without prior notice.
This manual may contain third-party trademarks or trade names,
however, they do not have them associated ® or ™ symbols. All the
trade marks appearing in the manual belong to the corresponding
owners. The use of these marks by third parties for their own purpose
could violate the rights of the owners.
http://www.fagorautomation.com
Email: info@fagorautomation.es
CNCelite
8058 8060
8065
R . 2106
EF
ꞏ5ꞏ