Page 2
From 1 to 4 (1) Depends on the type of function (2) Products manufactured by FAGOR AUTOMATION since April 1st 2014 will include "-MDU" in their identification if they are included on the list of dual-use products according to regulation UE 428/2009 and require an export license depending on destination.
CNC 8060/70 LASER 8070 CNC LASER CENTRAL UNIT Code Model Description 83701025 8070-L-ICU-RS Integrate Central Unit for Laser 83701035 8070-L-MCU-RS Modular Central Unit for Laser Central Unit components Code Model Description 83700065 SER-CAN-8I-8IO-A Sercos-Can module 83700200 MP-BASIC-4 Basic Processor 83700201 MP-PLUS-4 High level Processor 83701061...
CNC 8060/70 LASER 8060 CNC LASER CENTRAL UNIT 8060 CNC with 10.4” LCD and Operator Panel Code Model Description 83600021 8060-L-ICU Integrate Central Unit for Laser Central Unit components Code Model Description 83600031 MP-601 MP-601 Microprocessor 83600050 8060-SERCOS-2 Sercos module MONITOR &...
CNC 8060/70 LASER SOFTWARE DESCRIPTIONS Compact Flash (GB) (8070 CNC only) It may be of 4GB, 8GB or 32 GB. It must be present in all the configurations. By default, the option with the least capacity is always offered, the 4GB compact by default. SOFT 4 AXES INTERPOLATION LIMIT (8070 CNC only) It limits the number of axes that may be interpolated at the same time.
Page 7
CNC back in order to prevent the operators from installing other kinds of applications that could slow the system down and affect the machining operations. SOFT THIRD PARTY CANOPEN Enables the use of CANopen non-Fagor modules. SOFT FVC UP TO 10 m3 (8070 CNC only) SOFT FVC MORE 10 m3 (8070 CNC only) 5-axis machines are usually used to make large parts.
CNC 8060/70 LASER ACCESORIES Code Model Description 83760005 CNC FPU Fagor Power Unit 83700075 TRANSP-KEYS & EXTRACTOR 20 transparent key caps and an extractor tool 83700076 TRANSP-KEYS 20 transparent key caps 83700077 WHITE-KEYS 20 white key caps REMOTE I/O MODULES Are easy to install, they can be mounted at strategic points of the machine for having extra inputs and outputs distributed next to each device.
Page 9
CNC 8060/70 LASER SELECT THE CABLES NECESSARY FOR EACH CONFIGURATION CENTRAL UNIT IN OPERATOR PANEL Ready Made cables for CAN Bus (CAN CABLE) and Sercos ring (SFO & SFO-FLEX). SERCOS CABLE DRIVE SYSTEM CAN CABLE REMOTE MODULES GROUP CAN CABLE DRIVE System Each drive module having the Sercos interface option offers a small cable for connecting it to the adjacent module.
Page 10
CNC 8060/70 LASER CENTRAL UNIT IN ELECTRICAL CABINET Ready Made cables for passive monitor, CAN Bus (CAN CABLE) and Sercos ring (SFO & SFO-FLEX). SERCOS CABLE CABLE DRIVE SYSTEM CABLE REMOTE CENTRAL UNIT IN MODULES GROUP ELECTRICAL CABINET CAN CABLE DRIVE System Each drive module having the Sercos interface option offers a small cable for connecting it to the adjacent module.
Page 11
8GB Win 7 Compact Flash for High level Processor 83701104 CF-DMA-P7- 32GB UPG (RF) 32GB Win 7 Compact Flash for High level Processor MANUALS The manuals of the CNC may be downloaded from our FAGOR corporate website. http://www.fagorautomation.com - 11/12 -...
Page 12
Fagor Automation shall not be held responsible for any printing or transcribing errors in the Ordering Handbook and reserves the right to make any changes to the characteristics of its products without prior notice. You must always compare the data with that appearing in the manual.
Need help?
Do you have a question about the CNC 8060 LASER and is the answer not in the manual?
Questions and answers