Technical Data; Installation - Progress PBP5360 User Manual

38 progress
Problem
Steam and condensation
collect on the food and in
the appliance.
The display shows
, the appliance does
not heat up and there is
no air circulation.
The display shows the
error code "F...".
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

TECHNICAL DATA

Voltage
Frequency

INSTALLATION

Warning! Refer to "Safety information"
chapter.
Possible cause
You left the dish in the appliance
for too long.
Demo mode is on.
or
There is an electronic error.
Do not let the dishes stay in the
appliance for longer than 15-20
minutes after the cooking is com-
pleted.
Deactivate the appliance. Press
for approximately 2 seconds.
An acoustic signal sounds. Press
and hold the buttons
at the same time until the acoustic
signal sounds and the indicator
goes out.
Write down the error code and
contact the Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
.........................................
.........................................
.........................................
230 V
50 Hz
Building In
Remedy
and