Daily Use - Progress PBP5360 User Manual

26 progress
4. Let the appliance operate without the
food for approximately 10 minutes.
5. Set function
ature.
6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more

DAILY USE

Warning! Refer to "Safety information"
chapter.
The display
1
Button
PYROLYTIC CLEANING
/
Setting the oven function
1
1. Push
again and again until the sym-
bol for the necessary oven function
flashes.
The display shows an automatic tem-
perature. If you do not change the tem-
perature in approximately 5 seconds,
the appliance starts to operate.
and maximum temper-
2 3
Function
ON/OFF
SELECTOR
RAPID HEAT UP
PLUS, MINUS
CLOCK
2
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
1 Cooking function
2 Temperature
3 Time
Description
To switch the appliance on or off.
To set the oven function.
To switch the rapid heat-up function on.
To start the Pyrolytic cleaning.
To adjust the values (temperature and time).
To set the clock function.
2. To change the temperature, push
button.
If you start an oven function, the sym-
bol of the temperature flashes.
The symbol shows that the tempera-
ture in the appliance increases.
When the appliance is at the set tem-
perature, an acoustic signal sounds
and the symbol of the temperature
stops to flash.
If there is a power cut, the programmer
keeps all the settings for approximately
3 minutes. After more than 3 minutes
without power supply, you have to do
the settings (also the time of day)
again.
or