Using The Accessories - Progress PBP5360 User Manual

28 progress
Clock function
Minute minder
Duration
End
Duration and End
the same time, if the oven is to be
switched on and off automatically later.
In this case first set Duration
End .
Setting the clock functions
1. Set an oven function and a temperature
(not necessary for the Minute Minder).
Refer to "Setting the oven function".
2. Push
again and again until the sym-
bol for the necessary clock function
flashes.

USING THE ACCESSORIES

Warning! Refer to "Safety information"
chapter.
Turnspit
1 2 3
1 Handle
2 Spit
3 Forks
4 Turnspit frame
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
To set how long the oven has to be in operation.
To set the switch-off time for an oven function.
3. To set the time for Minute minder
can be used at
, then
4. Deactivate the appliance.
2 1
Cancelling the clock functions
1. Push
2. Push "
1. Install the deep roasting pan in the first
4
2. Install the turnspit frame on the second
3. Install the first fork in the spit.
4. Put the food to be grilled.
5. Install the second fork.
6. Install the point of the spit in the turnspit
7. Install the front part of the spit on the
8. Remove the handle.
9. Set the oven function and a temperature
Application
Duration or End
button.
The related clock function symbol
comes on.
When the time period is completed, the
clock function symbol flashes and an
acoustic signal sounds for 2 minutes.
Push any button to stop the signal.
With the functions Duration
the appliance stops automatically.
again and again until necessa-
ry function indicator and
" again and again until the
time is "00:00".
Warning! The forks and the spit of the
turnspit are sharp (if supplied). Be
careful when you operate it.
shelf position from the bottom.
shelf position from the bottom.
Use the screws to tighten the forks.
hole (refer to "Product description").
spit frame.
(refer to "Cooking tables").
,
, push or
and End
flashes.