Technical Data; Installation - Progress PBN1310 User Manual

14 progress
Problem
The appliance does not oper-
ate.
The appliance does not oper-
ate.
The oven lamp does not oper-
ate.
Steam and condensation col-
lect on the food and in the
oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

TECHNICAL DATA

Voltage
Frequency

INSTALLATION

Warning! Refer to "Safety information"
chapter.
Building In
560
570
Possible cause
The appliance is not activated.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the oven for
too long.
540
20
590
594
7
Activate the appliance. Refer to
the chapter "Daily Use".
Do a check of the fuse. If the
fuse is released more than one
time, contact a qualified electri-
cian.
Replace the oven lamp.
Do not keep the dishes in the
oven for longer than 15 - 20
minutes after the cooking ends.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
.........................................
.........................................
.........................................
230 V
50 Hz
min. 550
20
590
min. 560
Remedy