Inspection And Maintenance Schedule; Daily Preventative Maintenance Checklist - Upright TL38 Service & Parts Manual

I
NSPECTION AND
The Complete Inspection consists of periodic visual and operational checks, along with periodic minor
adjustments that assure proper performance. Daily inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance schedule should be performed at the specified inter-
vals. Inspection and maintenance shall be performed by personnel who are trained and familiar with
mechanical and electrical procedures.
W A R N I N G
!
Before performing preventative maintenance, familiarize yourself with the operation of the machine.
Always block the elevating assembly whenever it is necessary to perform maintenance while the
platform is elevated.
The daily preventative maintenance checklist has been designed for machine service and maintenance.
Please photocopy this page and use the checklist when inspecting the machine.
D P
AILY REVENTATIVE
M T
AINTENANCE
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
COMPONENT INSPECTION OR SERVICES
Check electrolyte level.
Battery
Check battery cable condition.
Check hoses for pinch or rubbing points.
Chassis
Check welds for cracks.
Check the exterior of the cable for pinching,
Control Cable
binding or wear.
Controller Check switch operation.
Drive Motors Check for operation and leaks.
Elevating
Inspect for structural cracks.
Assembly
Emergency Operate the emergency lowering valve and
Lowering System check for serviceability.
Entire Unit Check for and repair collision damage.
Page 12
M
AINTENANCE
K
ABLE EY
!
M
AINTENANCE
P
REVENTATIVE
Date:_______________________________________
Owner: _____________________________________
Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
Y N R COMPONENT
Hydraulic Fluid
Hydraulic Pump Check for hose fitting leaks.
Hydraulic
System
Labels
Platform Deck
and Rails
Platform Deck
and Rails
Tyres and Wheels Check for damage.

Inspection and Maintenance Schedule

S
CHEDULE
C
HECKLIST
M
AINTENANCE
INSPECTION OR SERVICES
Check fluid level.
Check for leaks.
Check for peeling, missing, or unreadable labels
& replace.
Check welds for cracks.
Check condition of deck.
TL38 Service & Parts
R
EPORT
Y N R