Page 1
MANUAL Installation, use, maintenance and safety FCC-G-20000-4.1 / GD4842S -SS OUTDOOR USE ONLY READ THE MANUAL, FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP. GET TO KNOW YOUR GRILL AND THE SAFETY INSTRUCTIONS BEFORE USING THE APPLIANCE!
Contents Warnings ........................3 Technical Data ......................4 Read before assembly ...................4 Parts list .........................6 Exploded Drawing ....................7 Assembly instructions ...................8 Regulator and hose - Connecting the gas ..........16 Check for leaks before using the barbecue ...........17 Last check ........................18 Lighting instructions ....................19 Maintenance ......................20 Advice, tips and safety ..................22 Troubleshooting ....................23...
WARNINGS! ● ACCESSIBLE PARTS OF THE GRILL BECOME VERY HOT DURING USE. KEEP CHILDREN AND OTHERS WHO NEED SUPERVISION AT A SAFE DISTANCE. ● THE GRILL IS INTENDED FOR OUTDOOR USE ONLY IN WELL- VENTILATED AREAS. ● LEAK TESTS (SEE PAGE ) MUST ALWAYS BE CARRIED OUT BEFORE THE GRILL IS USED AND WHEN REPLACING THE GAS CYLINDER.
Technical Data Tekniske data Tekniske data Total Heat input: 17.2kW (Main burners 3.8kWx4=14kW, Side burner 3.2kW). Gas consumption: 1252 gram/hour (main burner: 1019 g/h + side burner: 233 g/h) Gas cylinder (not included): Use standard cylinder approved for use in the Nordic Region. Even though butane and propane gas can be used, we recommend propane for use in the Nordic Region.
Page 5
Read before assembly FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS PERSON INJURY OR DAMAGE TO YOUR BARBECUE. Make sure that all parts and screws are in the box before mounting the product, please note that some parts may be located in the styrofoam in the side walls of the packaging. Compare the parts list with the contents of the box.
Parts List Assembly CODE DESCRIPTION WARMING RACK COOKING GRILL 1 COOKING GRILL 2 FLAME TAMER BODY ASSEMBLY RIGHT SIDE TABLE DECOR SHEET RIGHT SIDE TABLE GREASE CUP OIL TRAY, SUPPORT RIGHT SIDE RIGHT BACK FOOT RIGHT FRONT FOOT BOTTOM PANEL LOCKABLE CASTER WHEEL AXLE WHEEL...
GAS GRILL ASSEMBLY, USE AND CARE MANUAL GD4842S-AA Assembly STEP 1 Assemble the legs and bottom panel Assemble the legs and bottom panel Assemble the wheels and castors STEP 2 Assemble the wheels and castors — 4 —...
Page 9
GAS GRILL ASSEMBLY, USE AND CARE MANUAL GD4842S-AA Assembly Install the front panel STEP 3 Install the front panel. Install the drip tray brackets STEP 4 Install the drip tray brackets. — 5 — fccbbq.com...
Page 10
GAS GRILL ASSEMBLY, USE AND CARE MANUAL GD4842S-AA Assembly STEP 5 Install the firebox Install the firebox. 2. please change step 5 to this picture on page 9 NOTE! TWO PERSONS IS RECOMMENDED WHEN LIFTING THE STOVE BODY 3. please change step 7 to this picture on page 10 STEP 6 Install the tooling hook panels to the Install the tooling hook panels to the...
Page 11
GAS GRILL ASSEMBLY, USE AND CARE MANUAL GD4842S-AA Assembly Install the right side table assy STEP 7 Install the right side table assy. 3. please change step 7 to this picture on page 10 STEP 8 Install the side burner assy Install the side burner assy.
Page 12
Assembly Assembly STEP 9 Assemble the valve and knob of side burner.. Align the knob bezel (28) and fix Align the valve to the hole on the it to the valve using screw (E). back of the front panel on the side Then push the knob on to the table.
Page 13
Assembly STEP 10 Assemble the side burner Pass the side burners venturi tube (24) through the hole in the side table. Fix side burner (24) with screw E. Ignition wire connection Check that the end of the Attach the ignition wire venturi tube is positioned to the connection on the around the injector so the...
Page 14
Assembly STEP 11 Place the grills / warming rack / cooking rack. STEP 12 Insert the drip tray and grease cup. Place the matchstick holder assy.
Page 15
Assembly RILL ASSEMBLY, USE AND CARE MANUAL GD4842S-A STEP 13 The BBQ’s assembly is done. Read about connecting the gas on page 16. Finish the BBQ's assembly fccbbq.com...
Connecting gas FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS DAMAGE TO YOUR BBQ AND CAUSE PERSONAL INJURY. HOSE • Connect the gas hose to the gas inlet on the grill. Tighten well. • Install the regulator and hose. Follow the installation instructions that came with the controller set.
PERSONS, FIXED INSTALLATIONS AND YOUR BARBECUE. 7. If detected leakage cannot be rectified, do not attempt to cure leakage but consult your dealer or FCC BBQ Products support at support@fccbbq.com for help in solving the problem. ● LEAK TEST MUST BE DONE REGULARLY AND EVERY TIME THE GAS CYLINDER, REGULATOR OR HOSE IS REPLACED.
Last Check PLACEMENT OF THE BBQ • Ensure that the grill is placed at least 150cm in all directions from house walls, trees, plants and other flammable materials or liquids when in use. • Do not place the grill under a roof or overhang. •...
Lighting Instructions LIGHTING INSTRUCTIONS 1. Set all control knobs to off. 2. Open the lid. The lid must always be open when lighting the grill. 3. Open the gas valve of the gas cylinder. 4. Push the knob of the desired burner in and turn it to the left. The burner will ignite automatically.
Maintenance KEEP THE FIREBOX, FLAME TAMERS, COOKING GRATE AND ACCESSORIES CLEAN TO AVOID GREASE FIRES. IF A GREASE FIRE OCCUR amounts from running down on flame tamers and In case of grease fire, if possible close the gas on the grease tray. supply on the regulator / barbecue and Do not leave the barbecue when it is lit and close disconnectthe regulator.
Page 21
Maintenance layer of acid-free oil once or twice a year. CLEANING For barbecues that are placed in coastal All cleaning and maintenance must be areas, we recommend that you treat the grill performed when the barbecue is cold. Make more often. sure that the gas upply is switched OFF and the regulator is disconnected from the gas COOKING GRATE OG FLAME TAMERS...
Water from snow, ice and rain that enters the grill can overfill the grease collection system and cause leakage to the surface. • We recommend the use of FCC BBQ original covers for the best possible protection against rain, pollen and pollution. Remember that the grill must be completely dry and cold before applying the coating.
Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION Gas cylinder is empty Replace gas cylinder Damaged regulator Check/replace the regulator Burner is blocked Clean the burner Gas supply is blocked Clean gas ventury or hose BURNER WILL NOT LIGHT Electrode is broken or dirty Clean the electrode Ignition knob is broken Contact your dealer...
Consumer Contact This product is covered by a warranty in accordance with consumer legislation. It has undergone strict quality controls and testing at the factory. If there are any parts missing or the product has been damaged, please contact your dealer or the consumer contact below for help. In the event of damage to the product, we ask for pictures of the damage and damage to the product’s packaging is attached to the complaint.