49 Network configuration
System
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic 2 WiFi
ration area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The devolo Magic 2 WiFi
factory defaults in the System
area with the Factory Reset option.
Doing so causes you to lose your personal
WiFi and PLC settings. The last-assigned
passwords for the devolo Magic 2 WiFi
are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there
as
devolo Magic 2 WiFi
ful for creating a variety of configurations that will
let you quickly and easily set up the device for use
in different network environments.
2-1
devolo Magic 2 WiFi
Configuration
Save Configuration
2-1
in the System
2-1
is reset to the original
a
file
and
reloaded
2-1
. This function can be use-
Reboot device
In order to reboot the devolo Magic 2 WiFi
select the Reboot button in the System
guration area.
4.7.4 Firmware
Configu-
The firmware of the devolo Magic 2 WiFi
des the software for operating the device. If neces-
sary, devolo offers new versions on the Internet as
a file download, for example to modify existing
functions.
Current firmware
Configuration
The
currently
devolo Magic 2 WiFi
Searching for and updating firmware
automatically
2-1
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
into
the
installed
firmware
2-1
is displayed here.
The devolo Magic 2 WiFi
2-1
when a new firmware version becomes
available. The option is enabled by default.
2-1
,
Confi-
2-1
inclu-
of
the
lets you know