Devolo Magic 2 WiFi 2-1 Manual page 35

Hide thumbs Also See for Magic 2 WiFi 2-1:
Table of Contents

Advertisement

35 Network configuration
The WiFi network mode field lets you define your
preferred setting by clicking the respective field:
2.4 GHz + 5 GHz – Both frequency bands are
b
used
2.4 GHz – Only the 2.4 GHz frequency band is
b
used
5 GHz – Only the 5 GHz frequency band is used
b
Off – If desired, you can completely switch off
b
the WiFi section of your devolo Magic 2 WiFi
1
here.
Keep in mind that after saving this setting, you
will be disconnected from any existing wireless
connection to the devolo Magic 2 WiFi
this case, configure the device over Ethernet.
Network name
The network name (SSID) determines the name of
your wireless network. You can see this name
when logging onto the WiFi, allowing you to
identify the correct WiFi network.
Channels
There are 13 channels available in the 2.4 GHz
frequency band. The channels recommended for
Europe are channels 1, 6 and 11. This ensures the
frequency bands of the channels do not overlap
and any connection problems are avoided.
2-1
devolo Magic 2 WiFi
There are 19 channels available in the 5 GHz
frequency band.
The
channel
Automatic. The devolo Magic 2 WiFi
and automatically executes the channel selection
in this setting. In other words, if the last connected
station logs out, a search for a suitable channel is
carried out immediately. If no stations are
connected, the device automatically selects a
2-
channel every 15 minutes.
It is worth noting that connected devices also have
to support the increased frequency band of 5 GHz.
2-1
From channel 52 onward you go into the radar
. In
range. When accessing the device for the first time,
a radar detection phase (DFS) starts automatically,
during which time the devolo Magic 2 WiFi
cannot be accessed via WiFi. This can take up to 10
minutes.
In the Channel field, you can manually select a 2.4
GHz and a 5 GHz channel. If you are not sure which
wireless channels are used by nearby devices,
select the Automatic option.
Hide SSID:
The SSID specifies the name of your wireless net-
work. You can see this name when logging onto
selection
default
setting
2-1
regularly
is
2-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magic 2 lan 1-1

Table of Contents