Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Devolo Magic 1 LAN 1-1
Summary of Contents for Devolo Magic 1 LAN 1-1
- Page 1 Manual devolo Magic 1 LAN...
- Page 2 Magic 1 LAN...
- Page 3 The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo. We reserve the right to make any alterations that arise as the result of technical de- velopment.
-
Page 4: Table Of Contents
Installation of devolo software ..........21 Removing the devolo Magic adapter from a network ......22... - Page 5 Warranty conditions ............35 devolo Magic 1 LAN...
-
Page 6: Preface
After a brief introduction to „devolo Magic“ and to injuries or damage to property. the devolo Magic 1 LAN in Chapter 2, Chapter 3 tells you how to successfully start using the adapter An important note that should be in your network. -
Page 7: Intended Use
EU, Switzerland and Norway. tips for your device. * The only exceptions are devolo outdoor products, which are suited for the outdoor use thanks to their IP certification. Indicates a completed course of ac-... -
Page 8: Ce Conformity
Preface 8 Software A printout of the simplified CE declaration of this product is separately included and can also be devolo devices can be used only with the free, found under downloadable programs approved and available www.devolo.com/support/ce. on devolo AG's website (www.devolo.com) -
Page 9: Devolo On The Internet
(such as rain or other water). if the devolo device is inoperable. Do not cover devolo devices during operation. if the housing of the devolo device is damaged. Do not place any objects on devolo devices. Do not plug devolo devices directly into each Do not insert any objects into the openings of other. -
Page 10: Introduction
2.1 devolo Magic Be inspired by products that are astonishingly easy to install, with impressive, innovative technology Home is where devolo Magic is – in no time at all, and unbeatable performance. devolo Magic transforms your house or flat into a... -
Page 11: Introduction To The Devolo Magic Adapter
Wi-Fi frequently falls short due to cei- lings and walls. The devolo Magic name concept has the following To set up a devolo Magic network, you need at structure: least two devolo Magic devices. For technical reasons, devices from the devolo Magic series... -
Page 12: Pairing
One PLC/reset button (next to the network reset (see Chapter Resetting a devolo Magic ad- connection) apter or removing it from a devolo Magic net- work), automatically start to attempt to pair with another devolo Magic adapter when reconnected to the mains supply. - Page 13 Magic adapter The LED of this adapter now also flashes white. In order to use a new devolo Magic 1 LAN After a short time, the flashing LED beco- your devolo Magic- network, first you have to mes a steady white light.
- Page 14 Introduction 14 Keep in mind that all settings that have already been made will be lost! devolo Magic 1 LAN...
-
Page 15: Reading The Indicator Light
Red LED Flashes at in- Status 1: Cannot be disabled tervals of 0.5 The reset of the devolo Magic adapter was sec. (on/off) successful. The PLC/reset button has been pressed and held for 10 seconds. Status 2: The devolo Magic adapter (once again) has the factory default settings. - Page 16 The other network nodes are in standby mode and cannot currently be accessed over the mains supply. The PLC LEDs of the other devolo Magic adapters flash white only for a short time. Status 2: The connection to the other network nodes has been interrupted.
- Page 17 White Lights up stea- The devolo Magic connection does not have Can be disabled any issues and the devolo Magic adapter is ready to operate. White Flashes at in- The devolo Magic adapter is in standby mo- Can be disabled tervals de.***...
-
Page 18: Network Connection
Connecting the devolo Magic 1 LAN 2.3.2Network connection You can use the network connection on the devolo Magic adapter to connect it to a PC or tele- vision using a standard network cable. devolo Magic 1 LAN... -
Page 19: Initial Use
AG reserves the right to change the packa- ge contents without prior notice. This chapter tells you everything you need to know to set up and use your devolo Magic 1 LAN . We 3.2 System requirements describe how to connect the adapter and briefly describe the devolo software. -
Page 20: Connecting The Devolo Magic 1 Lan 1-1
(see Chapter 2.3.1 Reading the indicator and the power consumption, refer to the type plate on the light). rear of the device. For additional technical information on If the LEDs on both devolo Magic adapters products, refer the product area... -
Page 21: Devolo Magic Adapter
Magic adapter Before you can use the devolo Magic 1 LAN 3.3.3 Changing the network password your devolo Magic network, first you have to A network password can also be changed in the... -
Page 22: Removing The Devolo Magic Adapter From A Network
Ubuntu 13.10 (32-bit/64-bit), adapter from a network from Mac (OS X 10.9) To remove a devolo Magic adapter from your net- You can find the product manual, software and work and successfully restore its entire configurati- additional information on devolo Cockpit onli- on to the factory default settings, press the PLC/ ne at www.devolo.com/cockpit. -
Page 23: Configuration
You can find more information on devolo software in browser. Here, you can read out device informati- Chapter 3.4 Installation of devolo software. on and configure some settings for operating the devolo Magic adapter. -
Page 24: Overview
Click a menu to switch di- In the Overview area, you will find information on rectly to that menu: hardware and software for the devolo Magic ad- apter and network details. Fig. 3: Menu Save Confirm with OK to save the settings for the re- spective web interface area. - Page 25 25 Configuration The table lists all available and connected devolo Magic adapters in your network along with displaying some device details. You can find more detailed information on the displayed device details in Chapter 4.2.2 PLC. System Name: Device name...
-
Page 26: Plc
You can find more detailed information on the displayed network details in Chapter 4.2.3 LAN. 4.2.2PLC In the PLC area, you will find functions and infor- mation on the topic of Powerline and adapter pai- ring. Fig. 5 PLC devolo Magic 1 LAN... - Page 27 27 Configuration In order to use a new devolo Magic 1 LAN Pairing – Using custom password your devolo Magic network, first you have to You can also assign your network a custom PLC connect it to your existing devolo Magic adapters password you pick yourself.
- Page 28 Device ID: Device ID* (number) of the respective Operating mode: devolo Magic adapter in the devolo Magic net- work SISO * indicates the local devolo Magic adapter Signal transmission profiles:...
-
Page 29: Lan
IPv4 address, IPv4 net- mask, Default gateway and DNS fields. Confirm your settings with OK. Then, restart the devolo Magic adapter (see Chap- ter 4.2.5 Reset) to ensure that your changes take effect. Fig. 6: LAN... -
Page 30: System
Configuration 30 IPv6 configuration Then, restart the devolo Magic adapter (see Chap- ter 4.2.5 Reset) to ensure that your changes take If you want automatic IP address assignment and effect. there is already a DHCP server present on the net- work for giving out IP addresses (e.g. - Page 31 31 Configuration Identify device The devolo Magic adapter can be located using the Identify device function. Click Identify to make the white LED for the corresponding adapter flash for 2 minutes to make it easier to identify by sight. LEDs...
- Page 32 (e.g. computer) connected to password. We recommend assigning a password the network interface is switched on again, your when the installation of the devolo Magic 1 LAN adapter can also be accessed over the electrical is complete to protect it against tampering by wiring again.
-
Page 33: Reset
Then, navigate to the System Firmware 4.2.5 Reset upgrade area. Click Choose… and select the Here, restart the devolo Magic adapter and/or re- downloaded file. store it to the factory default settings. Confirm the update procedure with OK. After a successful update, the devolo Magic 1 LAN restarts automatically. -
Page 34: Appendix
5.1 Technical specifications of the network, we recommend that you comply with the following "connection rules": Security 128 Bit AES Plug the devolo Magic 1 LAN directly into a Device port 1x RJ45 wall socket. Avoid using power strips. This may (Gigabit Ethernet port) impair the transmission of the PLC signals. -
Page 35: Disposal Of Old Devices
5.3 Disposal of old devices 5.4 Warranty conditions To be used in the countries of the European Union If your devolo device is found to be defective du- and other European countries with a separate col- ring initial installation or within the warranty peri-... - Page 36 Disposal of old devices 35 Restart 33 Expanding an existing devolo Magic network 13 Safety notes 8 Starting up a new devolo Magic network 13 Factory default settings 13, 22, 33 Factory reset 13, 33 Integrated electrical socket 18 Intended use 7...
Need help?
Do you have a question about the Magic 1 LAN 1-1 and is the answer not in the manual?
Questions and answers