Devolo Magic 2 WiFi 2-1 Manual page 16

Expanding an existing devolo Magic PLC net-
work by adding another devolo Magic adapter
In order to use a new devolo Magic 2 WiFi
your devolo Magic- network, first you have to
connect it to your existing devolo Magic adapters
devices as a network. This is accomplished by using
a shared PLC password, which can be assigned in
various ways:
Using devolo Cockpit
b
devolo Home Network App (see Chapter 3.4
Installation of devolo software)
Using the web interface (see Chapter 4.5
b
Powerline)
Using the PLC button as described below.
b
To do so, plug the new devolo Magic adapter
1
into an available power socket and, for appro-
ximately 1 second, press the PLC button on a
devolo Magic adapter
devolo Magic network.
The new devolo Magic adapter pairs automati-
2
cally so no button needs to be pressed. The LED
of this adapter now also flashes white.
After a short time, the flashing LED beco-
mes a steady white light. The devolo Magic
adapter has been successfully integrated
into your existing devolo Magic network.
2-1
in
or the
in your existing
For each pairing operation, only one addi-
tional devolo Magic adapter can be added
at a time.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3 Connecting
.
2-1
devolo Magic 2 WiFi
devolo Magic 2 WiFi
Introduction 16
the
2-1