Devolo Magic 2 WiFi 2-1 Manual page 21

21 Introduction
Before the networking procedure, write
down the Wi-Fi key of the devolo Magic
2 WiFi
key on the label on the rear side of the
housing.
In order to connect the devolo Magic
2 WiFi
phone later via Wi-Fi, enter the noted Wi-
Fi key as the network security key.
In order to switch Wi-Fi off, press and hold the
b
Wi-Fi button longer than 3 seconds.
In order to switch Wi-Fi back on, briefly tap
b
the Wi-Fi button.
Connecting Wi-Fi devices via WPS
If the device is still on factory defaults, tap the
b
Wi-Fi button in order to activate WPS.
If the Wi-Fi connection was switched off and
b
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
If the Wi-Fi connection is switched on and you
b
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
2-1
devolo Magic 2 WiFi
. You can find the device's unique
2-1
with your laptop, tablet or smart-
2-1
WPS is one of the encryption standards de-
veloped by the WiFi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).