Devolo Magic 2 WiFi 2-1 Manual page 43

43 Network configuration
Using the web interface, in the PLC menu; as
b
described below:
Pairing – Using on-screen button
Click Start pairing to start the pairing opera-
1
tion. This may take some time.
As soon as the new devolo Magic adapter is
2
integrated into your existing network, it
appears in a list of available and established
connections (see Chapter Connections).
Pairing – Using custom password
You can also assign your network a custom PLC
password you pick yourself. Enter this password for
each devolo Magic adapter in the Network
password field and confirm your settings by
clicking the Disk icon.
Note that the custom password is not assigned
to the whole PLC network automatically. In-
stead, you must assign it separately to each of
your devolo Magic adapters.
Unpairing – Removing an adapter from a net-
work
To remove a devolo Magic adapter from your
1
devolo Magic network, click Leave Powerline
network.
2-1
devolo Magic 2 WiFi
Wait until the LED flashes red and then dis-
2
connect the devolo Magic adapter from the
mains supply.