Configuration
The system configuration of this camera series is as follows;
This camera has no accessories, please prepare other equipments separately.
● Camera:
● Camera mounting kit CPTBU, CPTBUBG (*1):
● USB3.0 Cable (*2):
● USB3.0 Interface Card (*2):
● e-CON Cable. (*2):
*1: Optional part. Contact your sales representative for details of option units.
*2: Commercial items.
Copyright © 2013 -2019 Toshiba Teli Corporation, All rights reserved.
This product. (BU)
To fix a camera to a tripod; attach this to the bottom of
the camera.
This cable is used to connect the camera to host PC.
Please use a USB3.0 cable of Standard A - Micro B.
This product is able to connect a USB cable equipped
with screw lock mechanism. Please use it as needed.
This is the interface card to connect to the camera.
Usually this card is installed to expansion slot of PC etc.
This cable is used to input external trigger signal and
output GPIO signal.
We recommend using shielded cable, because there is
likely to be affected by the noise depending on the
operating environment of the camera.
14 / 84
D4223121M
http://www.toshiba-teli.co.jp/en/