Table of Contents
Advertisement
(9) New lens mount TFL-II
TOSHIBA TELI's unique TFL-II mount to take advantage of the resolution of a large high-precision sensor is
employed for the lens mount. The TFL-II mount is large and has a flange back as short as 17.5mm to support
high performance lenses. The lens attaching part is a M48 screw mount with φ50mm positioning engaging
mechanism to support high precision. An F mount lens can also be used via an optional FTAR-2 mount
conversion adaptor.
3. Configuration
(1) Camera ······················································································· 1
(2) Accessories
Instruction manual (Japanese) ······················································· 1
Instruction manual (English) ··························································· 1
Application software is not attached to this camera.
4. Option
(1) DC IN cable
(2) Camera link cable
(3) Camera adaptor
(4) Tripod mounting hardware
(5) F mount conversion adaptor
*NOTE: Contact your dealer / distributor for details of option units.
*Conformity of optional peripherals and EMC regulations
The adaptability of the safety standard of this camera is guaranteed in the condition of
combination with the above-mentioned option parts. The customer must execute the
confirmation of a final safety conformance with the machine and the entire device when it
combines with parts other than our specification and it is used.
CPRC3700-**
14B26-SZLB-***-0LC (Sumitomo 3M）
(Recommended cable length: 5m or less)
CA130C
CPTC12M
FTAR-2
9
D4163443A
Advertisement
Table of Contents
