Dispensing Systems - Miele PG 8593 Operating Instructions Manual

Additional settings
Activating
dispensing
systems
86

Dispensing systems

Up to two process chemicals can be dispensed in each wash block.
Using the following menu you can activate and vent the dispensing
system, change the name if necessary and set the dispensing
concentration for all programs.
Individual dispensing systems can be activated or deactivated for all
programs as follows.
Open the menu as follows:

Button 
Additional settings

Dispensing system

DOS...
 (name of dispensing system)
DOS
Active
-
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see Program charts).
- Inactive
The selected dispensing system is deactivated for all programs.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

Active
Inactive