Additional Programs; Program Selection Depending On The Accessories Used; Short; Standard - Miele PG 8593 Operating Instructions Manual

Laboratory glassware washer
Table of Contents

Advertisement

Additional programs

Program
Special 93°C-10'
Drain
Rinse
Demineralized rinse

Program selection depending on the accessories used

Upper basket
Carrier
2 injector
with spray arm
modules
for various inserts
Area of application
Program for cleaning and thermal disinfection at 93°C with
10 minutes' temperature holding time.
The wash water is not pumped away until after disinfection is
complete.
To drain away wash water, e.g., after a program has been
cancelled (see "Operation / Cancelling a program").
Program for rinsing the wash cabinet, for flushing out brine (see
"Water softener / Adding reactivation salt"), or for rinsing heavily
soiled wash items, e.g., for preliminary removal of soiling, residual
disinfecting agent, or to prevent residues from drying on and
forming incrustations before running a full load. Cold water is used
for rinsing, holding time: 1 Min
Program for rinsing the wash cabinet and for rinsing wash items
with DI water, holding time: 3 Min.
Lower basket
Carrier
for various inserts
Water volume
2 injector
modules
+ 2.0 to 2.5 l
A 303
(+ 1 module)
Program guide
Program

Universal

Standard

Intensive

Inorganic

Organic

Plastics

Short

Oil program

Injector Plus

Pipettes

163

Advertisement

Table of Contents
loading

Table of Contents