Interrupting A Program - Miele PG 8593 Operating Instructions Manual

Interrupting a program

The factory default setting prevents interruption of programs while
they are running. If required, this function can be activated by Miele
Technical Service.
A program which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.
 Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning, and
chemical burns.
Press the  button.

You are asked if you really wish to open the door.
If the temperature in the wash chamber is above 60 °C at the
moment, it is first necessary to acknowledge the following message:
Warning! Cabinet hot.
Open anyway?
Confirm the message with OK.

Open door?
Yes
No
Use the  and  arrow buttons to select

By pressing the OK button the program is interrupted.

Yes
Selecting interrupts the program and the door opens. The display
shows the following message:
Program interrupted:
Door open
Rearrange the items so that they are stable and close the door.

The program continues from the point at which the interruption
occurred. Every program interruption is recorded in the cycle report.
If no button is pressed for several seconds, or if the process is
cancelled using the  button, the display will revert to the program
sequence display. The program is not interrupted.
Operation
Yes
.
59