Advertisement
Quick Links
Application
•
24V DC Chain Motor.
•
Natural and Smoke Ventilation
applications
•
Configurable:
•
Speed
•
Stroke
•
Seal Relief
•
Volt Free Contact (optional)
•
Range of Fixing Systems.
•
Options for customisation to meet
application requirements.
•
Marked
•
Tested to principles of EN1210-2: 2003
Annex G
+44 (0)1543 443060
sales@secontrols.com
www.secontrols.com
SECO Ni 24 40
Technical information and operating instructions
Please keep these operating instructions for future reference and maintenance.
Subject to technical modifications. Diagram is not binding.
Advertisement
Related Manuals for SE Controls SECO Ni 24 40
Summary of Contents for SE Controls SECO Ni 24 40
- Page 1 SECO Ni 24 40 Technical information and operating instructions Application • 24V DC Chain Motor. • Natural and Smoke Ventilation applications • Configurable: • Speed • Stroke • Seal Relief • Volt Free Contact (optional) • Range of Fixing Systems.
-
Page 2: Specification
Specification Actuator SECO Ni 24 40 Actuator Type 24V dc Chain Opener Voltage (all +/-5%) 24V dc Amp Draw Current (with load) 0-600mm = 1.0A, 601-900mm = 1.2A Stroke 0-600mm configurable, 601-900mm configurable Operating Speed 600mm = 12mm/sec, 900mm = 15mm/sec Ambient Operating Temp -5°C +60°C... - Page 3 1.1 General Safety Information 1.2 Health and Safety SE Controls reserves the right to introduce any Electrical Safety; Warning 230 V AC Dangerous modifications and improvements to the contents of this voltage. Can cause death, serious injury or considerable material damage. Disconnect the publication without the obligation of giving prior notice.
- Page 4 Care must be taken to ensure that actuator products are controlled with compatible After installation and any changes to the system check all products; refer to SE Controls. No liability will functions by a trial run. be accepted and no guarantee nor service is granted if actuator controls are used without such compatibility being confirmed.
- Page 5 The gear system is greased for life and is maintenance free. Defective equipment must only be repaired by SE Controls. Only original spare parts are to be used. After maintenance, repair or any changes to the system check all functions by a trial run.
-
Page 6: Product Components
Installation Guide A. Top hung B. Bottom hung C. Top hung open open out window open in window out window on sill Product Components 1. Body of 2. Trunnion set (installed on the chain actuator moving part of the window) 3. - Page 7 Installation Guide A. Top hung open out window installation Fix the trunnion set in the mid position on the moving part of the window. Close the window, then fix the chain actuator body with the pivot bracket set (3) provided. It should be aligned with the trunnion set (2) on the moving part of the window.
- Page 8 Installation Guide C. Top hung open out window on sill installation Fix the trunnion set in the mid position on the moving part of the window using the holding bracket provided. Close the window, then fix the chain actuator body with the pivot bracket set provided. It should be aligned with the trunnion set on the moving part of the window.
- Page 9 Lancaster House Wellington Crescent sales@secontrols.com Fradley Park, Lichfield www.secontrols.com Staffordshire WS13 8RZ Name & registered office: Loanguard Limited, Lancaster House, Wellington Crescent, Fradley Park, Lichfield, Staffordshire WS13 8RZ Company No.01468061 Vat No.377 5600 30 - SE Controls is a Registered Trademark...
Need help?
Do you have a question about the SECO Ni 24 40 and is the answer not in the manual?
Questions and answers