Assembly Of Bm12, Bm12 Co - Beko BEKOMAT 12 Original Installation And Operation Manual

Original installation and operation manual

6.2 Assembly of BM12, BM12 CO

For assembly work to be carried out, the following prerequisites must be fulfilled and the preparatory tasks must have
been completed.
Tools
• e.g. adjustable spanner
Depressurise the compressed gas system or the respective system section and secure it against unintentional
1.
pressure build-up.
Illustration
44
C
E
Prerequisites
• Sealants
• Feed line and discharge line
Preparatory tasks
23
D
G
F
Material
Always to be worn:
Description / explanation
2. Remove the dust cap [44].
3. Screw the enclosed hose connection [23] to the
condensate discharge.
Assembly instructions
• The gradient of the condensate inlet line [C] must be ≥3
%.
• Do not mount any filters in the condensate inlet line [C].
• The diameter of the condensate inlet line [C] must be
≥1/2" (inner diameter ≥13 mm (0.5")).
• The cross-section of the manifold must correspond to at
least the sum of the individual cross-sections.
• Do not reduce any of the given line cross-sections e.g.
by means of reducing nipples.
• Recommended interval:
Equip the condensate inlet line [C] with a shut-off
valve [D] to make simple product maintenance possible.
4. For the condensate inlet line [C] apply sealant to the
end of the pressure-resistant pipe and screw in at the
condensate inlet.
Assembly instructions
• The condensate discharge line [F] may be max. 10 m
(32.8 ft) long and laid rising by max. 5 m (17 ft). The
minimum pressure required increases by 0.1 bar (1.5 psi)
per metre of incline.
• The diameter of the manifold [G] must be ≥1/2" and the
gradient ≥3 %.
• Do not use shut-off valves in the condensate discharge.
• Do not kink or block the pressure hose [E] , or route it
across storage or transport areas.
5. For the drain, connect a short pressure hose [D]
(designed for the system pressure) to the condensate
discharge and the condensate discharge line [F] using a
hose clamp.
BEKOMAT 12, 12 CO, 12 CO PN63
®
Protective equipment
23 | 64