Assembly; Warning Notices - Beko BEKOMAT 8 Installation And Operation Manual

Installation and operation manual

3. Assembly

3.1. Warning notices

DANGER Insufficient qualification, explosion
Inappropriate handling due to insufficient qualification can lead to explosions, serious property
damage and personal injuries or death.
•
•
DANGER Escaping compressed gas
Risk of serious or even fatal injury through faulty assembly or non-secured system components.
•
•
•
•
•
•
Skilled technical personnel
1
Skilled technical personnel are people who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in a
position to independently foresee potential dangers in relation to the use of the device and who are qualified to perform the tasks
described in this manual. Special assembly conditions e.g. aggressive media require additional knowledge. It is the responsibility of
the device/plant owner to ensure that the instructions in this manual are adhered to.
14
All the tasks described in this installation and operation manual may only be carried out by skilled
technical personnel¹ with the qualifications described below.
The skilled technical personnel¹ must have read and understood the contents of the installation and
operation manual before carrying out any tasks.
Depressurise the system before carrying out any assembly work.
Use only pressure-resistant installation materials and suitable tools that are in proper working order.
Before pressure build-up, check all unit parts and repair them, if necessary. Open valves slowly to
prevent pressure blow outs in operating state.
Always prevent people or objects from being affected by condensate or escaping compressed gas.
Prevent vibrations, oscillations and impact from being transferred to system parts.
Carry out a leakage test.
EN
BEKOMAT 8/9
®