Power Control Board Dc - Beko BEKOMAT 12 Original Installation And Operation Manual

Original installation and operation manual

7.2.1.2 Power control board DC

Illustration
3
56
5
6
7
2
9
35
6 mm (0.23")
60 mm (2.36")
+24 VDC (0V)
0V (+24 VDC)
5
6
7
Description / explanation
1. Loosen the 4 pan-head screw [3] in the top
cover and unscrew the components of the cable
gland [5, 6, 7, 8].
8
2. Raise the top cover [2] a little and pull the screw
terminal [56] of the power control board up and off.
3. Unscrew the pan-head screw [35] and take the power
control board [9] out of the top cover [2].
4. Prepare the 2-wire cable of the voltage supply.
H
5. Slide the components of the cable gland [5, 6, 7] over
the cable for voltage supply [H] and insert the cable
into the top cover.
BEKOMAT 12, 12 CO, 12 CO PN63
®
29 | 64