Beko BEKOMAT 12 Original Installation And Operation Manual page 59

Original installation and operation manual
Pos. no. Description / explanation
[1] Operating label with TEST button
[2] Top cover
[3] Pan-head screw M3 x 10
[4] Dust protection pane
[5] Sealing ring for PG9
[6] Clamp cage for PG9
[7] Pressure screw for PG9
[8] Locking element
[9] Power control board
[10] Hexagon nut M5
[11] Washer
[12] Control air cover
[13] Pan-head screw M4 x 30
[14] Seal for solenoid valve connector
[15] Solenoid valve connector
[16] Fixing screw for solenoid valve connector
[17] Core guide pipe
[18] Oval ring 21.8 x 1.5 x 2.5 mm
[19] Valve core
[20] Conical spring
[21] Membrane cap
[22] O-ring 5.5 x 1.5 mm
[23] Hose connection Ø10 mm
[24] Membrane seat
[25] Pan-head screw M4 x 12
[26] O-ring 9.25 x 1.78 mm
[27] Membrane
[28] Pressure spring for membrane
BEKOMAT
Pos. no. Description / explanation
O-ring 5 x 1.5 mm (top)
[29]
O-ring 6 x 1.5 mm (bottom)
[30] Flange
[31] O-ring 11.1 x 1.78 mm
[32] Countersunk head screw M4 x 25
[33] Solenoid coil
[34] O-ring 5.5 x 1.5 mm
[35] Pan-head screw M3 x 6
[36] Cable terminal for solenoid valve
[37] Sealing ring for PG7
[38] Pressure ring for PG7
[39] Pressure screw for PG7
[40] Earthing screw
[41] O-ring 4 x 1.5 mm
[42] Housing
[43] Condensate inlet
[44] Dust cap R1/2
[45] Sensor tube
[46] O-ring 31.42 x 2.62 mm
[47] Fixing screw
[48] O-ring 34.59 x 2.62 mm
[49] Bottom cover
[50] Cover mounting element
[51] Control PCB
[52] Cord packing 2 x 315 mm
[53] -
[54] Cable terminal for external test button
[55] Pan-head screw M3 x 6
[56] Cable terminal for voltage supply
12, 12 CO, 12 CO PN63
®
59 | 64