Advertisement
Warnings
Warnings
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
FIRE
FIRE AND
FIRE
AND EXPLOSION
AND
Flammable fumes, such as solvent, in work
the equipment can cause static sparking. To help prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded fluid lines.
Stop operation
operation immediately
• Stop
Stop
operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
• Route exhaust away from all ignition sources. If diaphragm ruptures, fluid may be exhausted
with air.
PRESSURIZED
PRESSURIZED EQUIPMENT
PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin
and cause serious injury.
• Follow the Pressure
cleaning, checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check fluid lines, tubes, and couplings daily. Replace worn or damaged parts immediately.
812.0065
WARNING
EXPLOSION HAZARD
EXPLOSION
HAZARD
HAZARD
immediately if static sparking occurs or you feel a shock. Do not use
immediately
EQUIPMENT HAZARD
EQUIPMENT
HAZARD
HAZARD
Pressure Relief
Pressure
Relief Procedure
Relief
Procedure when you stop spraying/dispensing and before
Procedure
work area
area can ignite or explode. Solvent flowing through
work
area
Grounding instructions.
Grounding
Warnings
3
Advertisement
