Safety And Instructional Decals - Toro MB TX 2500 Operator's Manual

•
Charge batteries in an open, well-ventilated area,
away from spark and flames. Unplug the charger
before connecting or disconnecting it from the
battery. Wear protective clothing and use insulated
tools.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Use the cylinder lock to secure the hopper in the
raised position.
•
Keep nuts and bolts tight. Keep equipment in
good condition.
•
Never tamper with safety devices.
•
Use only genuine Toro replacement parts to
ensure that original standards are maintained.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
115-4212
1. Hydraulic-fluid level
2. Read the Operator's
Manual.
115-4858
1. Crushing hazard of hands or feet—install the cylinder lock.
decal115-4212
3. Warning—do not touch the
hot surface.
decal115-4858
•
Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes, and clothing. Protect
your face, eyes, and clothing when working with a
battery.
•
Battery gases can explode. Keep cigarettes,
sparks, and flames away from the battery.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid. Use cardboard or paper to find hydraulic
leaks; never use your hands. Hydraulic fluid
escaping under pressure can penetrate skin and
cause injury requiring surgery within a few hours
by a qualified surgeon; otherwise, gangrene may
result.
1. Read the Operator's
Manual.
6
116-8775
2. Warning—fill to the bottom
of the filler neck; do not
overfill the tank.
133-5619
decal116-8775
decal133-5619