Dispensing Hot Water; Beverage Customisation And Profile Creation; Customisation - Gaggia Milano CADORNA MILK RI9603 Operating Instructions Manual

ESPRESSO LUNGO AMERICANO
CAFÈ AU LAIT ACQUA CALDA
ON/OFF my favourites HOME clean/setting
COFFEE
30 ml
TEMP
medium
ESPRESSO
FF
my favourites HOME
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US.indd 21

Dispensing Hot Water

Warning: when the machine starts preparing hot water, the hot water dispensing
spout may spray steam and hot water.
1 Remove the Capp in Cup system and place a container under the steam wand.
2 Press the HOME
buttons "
3 Press the " HOT WATER " button. Finally, press the START/STOP
commence dispensing.
Note: you can interrupt the brewing at any time by pressing the START/STOP
button.
If you wish to customise the settings please refer to the "Customisation" chapter.
START/STOP
Beverage Customisation and Profile
Creation
This machine makes it possible to modify the settings of a beverage according to
your preferences and save it to one of four available profiles.

Customisation

1 Press the HOME
2 Select your beverage.
3 All the settings that can be adjusted and/or selected are displayed on the
screen. Based on the type of beverage, you can adjust and/or select:
the amount of coffee and milk;
-
the temperature of the coffee;
-
the dispensing of two cups at the same time;
-
the use of pre-ground coffee;
-
the intensity of the aroma (only when using coffee beans);
-
clean/setting
START/STOP
button, browse the windows displayed through the green
" and " ", until you find the hot water icon.
HOME
button.
HOME
English
21
button to
START/STOP
START/STOP
23/04/2020 09:57:47