Wlan Module - HP Chromebook x360 11 G4 Education Edition Maintenance And Service Manual

WARNING!
Do not puncture, twist, or crack the battery.
●
Do not cause an external puncture or rupture to the battery. They can cause a short inside the battery,
●
which can result in battery thermal runaway.
● Do not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which might
puncture the battery.
Do not compress or squeeze the battery case with tools or heavy objects stacked on top of the case.
●
These actions can apply undue force on the battery.
● Do not touch the connectors with any metallic surface or object, such as metal tools, screws, or coins,
which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through Windows
before you remove the battery.
Remove the battery:
1. Lift the tape off the system board connector (1), and then disconnect the battery cable from the system
board (2).
2. Remove the four Phillips M2.0 × 5.0 screws (3) that secure the battery to the computer.
3. Remove the battery from the computer (4).
To replace the battery, reverse the removal procedures.

WLAN module

To remove the WLAN module, use this procedure and illustration.
To avoid personal injury and damage to the product:
Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of
Preparation for disassembly on page
23).
Component replacement procedures
23).
25