HP Chromebook x360 11 G4 Education Edition Maintenance And Service Manual page 49

b. Release the cable from the left hinge cover (1). The rubber cable holder (2) releases from the inside
of the hinge cover when you remove the cable. Be sure to replace this rubber piece when
reassembling the display assembly.
c. Remove the three Phillips broadhead M2.5 × 3.0 screws (1) from each hinge.
d. Remove the hinges from the display rear cover (2).
The display hinges are available as spare part number M47236-001.
13. If you need to remove the hinge covers from the hinges:
a. Remove the rubber cable holder from the inside of each hinge cover (1).
b. Remove the Phillips M2.0 × 2.0 screw from the inside of each hinge cover (2).
c. Slide the hinge covers off the hinges (3).
The hinge covers are available as spare part number M47237-001.
Component replacement procedures 41