Table of Contents
Advertisement
This product is intended for installation only by expert users. Please
consult with a qualified technician for installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products,
nor their installation. The following instructions are subject to change
without notice. Please visit our web site at www.ekwb.com for updates.
Before installation of this product please read important notice, disclosure
and warranty conditions printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Please carefully read the manual before beginning with the
installation process!
The EK fittings require only a small amount of force to screw them
firmly in place since the liquid seal is ensured by the rubber o-ring
gaskets.
The use of corrosion inhibiting coolants is always recommended
for any liquid cooling system. EKWB recommends any of the EK-
Cryofuel for worry-free usage.
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Classic 160 SPC PWM D-RGB and is the answer not in the manual?
Questions and answers