Table of Contents
Advertisement
Height Adjustment
It allows adjustment for 3 heights between the PCB and the Heating Area of the Preheater.
Low level
28mm
Medium level
50mm
High level
70mm
To change the height to the highest level, proceed as follows:
1. Remove the 4 clamp knobs
and the 4 black rubber caps.
4
180°
2. After removing both guides,
turn 180° the guide supports.
Unscrew these knobs
to place the support in
the lowest level
Use the fixing brackets to
place the support in the
medium and the high level
3. Place the guides, the
rubber cups and adjust the
sliding clamp knobs again.
Advertisement
Table of Contents
