Table of Contents
Advertisement
w w w.jbctools.com
Maintenance
Before carrying out maintenance or storage, always allow the equipment and the support to cool
down.
- Check periodically that the Pre Heater is clean.
- Use a damp cloth when cleaning. Alcohol can only be used to clean the metal parts.
- Only if it is absolutely necessary and if cleaning with isopropyl alcohol (IPA) is not enough, it is
recommended to use a scraper to remove dirt in the glass area.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
13
Advertisement
Table of Contents
