urmet domus 1096 User Manual page 16

Operating features
Accessing the camera OSD menu
Using the UTC/PTZ interface, through the use of the HVR devices in the Urmet catalogue, the OSD menu
of the cameras can be accessed by pressing the central button of the graphic interface of the HVR remote
control and then scrolling through the menus using the arrow buttons.
Refer to the respective product manuals for using the controls.
For using the 1080P and 1080N series HVRs, refer to the complete manual of these cameras which can be
downloaded from Urmet website (see below).
IR lighting adjustment (only for 1096/405)
A trimmer located on the bottom of the camera, under the protective cap, allows the adjustment of the IR
lighting in case of particular installations where maximum lighting could create reflections on the image.
MENU USE
The camera uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols or it is possible to access to the next submenu,
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT→ SAVE&END
and press the central button.
To reactivate the default values select the item EXIT→ RESET and press the central button.
16
DS1096-117A